Beefy Boxes and Bandwidth Generously Provided by pair Networks
"be consistent"
 
PerlMonks  

Re: baudrate issue with script

by jmlynesjr (Friar)
on Nov 08, 2012 at 23:48 UTC ( #1003026=note: print w/ replies, xml ) Need Help??

Comment on Re: baudrate issue with script
Re^2: baudrate issue with script
by motoprog (Initiate) on Nov 10, 2012 at 05:24 UTC
    No I haven't tried Arduino. The script above worked when using it on my other ten year old laptop that ubuntu 10 installed on it and a serial port. Now I have a new laptop with ubuntu 12 installed, and a laptop that only has USB ports. I would really like to get this programme going. I think it's a permission thing. When testing the ports my RS232 adapter does get identified. It's just when I run the script I get the baudrate message. Any ideas??

      This may take a few posts to resolve.

      Does it work correctly if run from a root login and fail when run from a regular login? If so, it's a permission issue. What do you get if you plug in your usb device and run the lsusb shell command as root and as a regular login?

      I'm not a linux guru, but I did resolve permission issues with installing SANE drivers for a Kodak 5250 AIO printer/scanner with a USB interface. The fix involved creating and assigning myself to a group, in my case "scanner"(step 6) and creating a new rule in the /etc/udev/rules.d/ directory(step 7).

      Have you searched http://help.ubuntu.com/community? Ex: search "setting usb permissions" http://askubuntu.com/questions/15570/configure-udev-to-change-permissions-on-usb-hid-device. Or search "udev syntax" http://askubuntu.com/questions/50357/how-to-run-a-shell-script-when-a-new-usb-storage-device-is-detected

      Update:

      Also google udev rules, ex:wiki.debian.org/udev or reactivated.net/writing_udev_rules.html.

      As an example(from http://sourceforge.net/projects/cupsdriverkodak/forums/forum/2125778/topic/5396909)see the SANE Scanner fix below:

      James

      Thanks to all for your efforts in the development of the CUPS driver/S +ANE backend for Kodak Aio printers! I had previously successfully installed the CUPS driver and would now +like to document my experience installing the SANE backend for Kodak +Aio for an ESP 5250 printer. I run Ubuntu 10.10 on an old IBM Thinkpad laptop and I am a user rath +er than a developer. This process took about 8 +/- hours of reading r +elease notes, readme files, man pages, and forum posts and a good bit + of trial and error. Here's what finally worked for me: 1. From sourceforge.net/projects/cupsdriverkodak/files/scanning-saneba +ckend Downloaded kodakaio-02.4.tar.gz Extracted to /home/kodak direct +ory 2. Installed 3 of the recommended packages. libusb-dev was already ins +talled on my system. sudo apt-get install libcups2-dev sudo apt-get i +nstall libcupsimage2-dev sudo apt-get install libcupsdriver1-dev 3. Followed Release Notes instructions: cd kodakaio-02.4 cd sane-backe +nds-kodakaio-02.4 ./configure --prefix=/usr --sysconfdir=/etc --local +statedir=/var BACKENDS=kodakaio make sudo make install 4. Edited the file /etc/sane.d/kodakaio.conf # net autodiscovery (I do +n't use wifi with this printer) usb 0x040a 0x4041 (ESP 5250 usb codes +) scanimage -L still did not see the scanner 5. Edited the file /etc/sane.d/dll.conf kodakaio scanimage -L now sees + the scanner as root only (Note: The Release Notes seem to be in erro +r here, referencing kodakaio.conf instead of dll.conf. As corrected, +steps 4 and 5 should be reversed to match the Release Notes.) 6. Created a scanner group using system->Administration->Users and Gro +ups and added myself to this group. 7. Created /etc/udev/rules.d/90-libsane.rules LABEL="libsane_usb_rules +_begin" # Kodak ESP 5250 ATTRS{idVendor}=="040a", ATTRS{idProduct}==" +4041", MODE="0664", GROUP="scanner", ENV{libsane_matched}="yes" LABEL +="libsane_usb_rules_end" 8. scanimage -L now sees the scanner as myself(and root) scanimage > mytestscanfile Simple Scan XSane Image Scanning Program Ar +e all working under Ubuntu 10.10 I hope this summary helps someone save a few hours of research.

Log In?
Username:
Password:

What's my password?
Create A New User
Node Status?
node history
Node Type: note [id://1003026]
help
Chatterbox?
and the web crawler heard nothing...

How do I use this? | Other CB clients
Other Users?
Others contemplating the Monastery: (16)
As of 2015-07-02 21:59 GMT
Sections?
Information?
Find Nodes?
Leftovers?
    Voting Booth?

    The top three priorities of my open tasks are (in descending order of likelihood to be worked on) ...









    Results (45 votes), past polls