comment on

cpanm (App::cpanminus) 1.5021 on perl 5.016002 built for MSWin32-x64-m
+ulti-thread
Work directory is /.cpanm/work/1375126747.1448
You have make C:\Perl64\site\bin\dmake.exe
You have LWP 6.04
Falling back to Archive::Tar 1.90
You have C:\app\client\product\11.2.0\client_1\bin\unzip.exe
Searching Math::Pari on cpanmetadb ...
--> Working on Math::Pari
Fetching http://www.cpan.org/authors/id/I/IL/ILYAZ/modules/Math-Pari-2
+.01080605.tar.gz
-> OK
Unpacking Math-Pari-2.01080605.tar.gz
Entering Math-Pari-2.01080605
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.64)
Configuring Math-Pari-2.01080605
Running Makefile.PL
Set up gcc environment - gcc.exe (rubenvb-4.5.4) 4.5.4
Did not find GP/PARI build directory around.
Non-interactive session, autofetching...

Getting GP/PARI from ftp://megrez.math.u-bordeaux.fr/pub/pari/unix/
Not in this directory, now chdir('OLD')...
Available beta versions: `2.0.20 2.0.18 2.0.17 2.0.16 2.0.21 2.0.19'
Latest supported beta is `pari-2.0.21.beta.tgz'
Available golden versions: `2.1.6 2.1.3 2.1.0 2.1.1 2.1.5 2.1.7 1.39.0
+3 2.1.2 2.1.4'
Latest supported golden is `pari-2.1.7.tgz'
Picking golden version 2.1.7, file pari-2.1.7.tgz
Downloading `ftp://megrez.math.u-bordeaux.fr/pub/pari/unix/pari-2.1.7.
+tgz'...
Downloaded...
Extracting...
gzip -dc pari-2.1.7.tgz | tar -xvf -
'gzip' is not recognized as an internal or external command,
operable program or batch file.
Can't un-targz PARI: $!=Bad file descriptor, exitcode=65280.
  Now retry with "C:\Perl64\bin\perl.exe" "-MArchive::Tar" "-wle" "Arc
+hive::Tar->new(shift)->extract()" "pari-2.1.7.tgz"
Looking for patches for 2.1.7...
Patching...
'patch' is not recognized as an internal or external command,
operable program or batch file.
cd pari-2.1.7 && patch -p1  < ..\patches\diff_2.1.7_mingw-w64
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1  < ..\patches\patch-pari-unnormalized-float
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1  < ..\patches\diff_2.1.7_-O
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1  < ..\patches\diff_2.1.7_div
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1  < ..\patches\diff_2.1.6_align_power_of_2
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1  < ..\patches\diff_2.1.7_restart
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
Finished patching...
Setting up Math::Pari with Perl 5.016002 on MSWin32 version 5.2;
   cc=C:\Perl64\site\bin\gcc.exe, gccversion=gcc.exe (rubenvb-4.5.4) 4
+.5.4, cccdlflags=' ',
   ccflags='-DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT -DWIN64 -DCONSERVA
+TIVE -DPERL_TEXTMODE_SCRIPTS -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONT
+EXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DHASATTRIBUTE -fno-strict-alias
+ing -mms-bitfields',
   optimize='-O2',
   ld=C:\Perl64\site\bin\g++.exe, ldflags='-L"C:\Perl64\lib\CORE"'.
Found GP/PARI build directory in pari-2.1.7
     (integer-formatted version 2001007).

  ### GP/PARI library version 2.1.* has many problems fixed in version
+s 2.3.*.

  ### Especially important are the problems with symbols `hiremainder'
+ and
  ### `overflow' - if your build fails and error messages contain thes
+e
  ### words, updating to 2.3.* might allow your use of fast processor-
+specific
  ### assembler code.)

  ### Switching to 2.3.* should be as simple as giving Makefile.PL an 
+option
  ###           version23_ok=1
  ###   (if you or Makefile.PL already downloaded-and-extracted versio
+n-2.1.* 
  ###    distribution, give an extra option, force_download).
  ### Alternatively, give option
  ###           paridir=DIRECTORY-of-extracted-distribution

  ### However, keep in mind: v.2.3.* supports only plotting to PostScr
+ipt.

...Generating libPARI/paricfg.h ...
Scanning header files...
Note (probably harmless): Errors reading from pipe: '', exit=256: C:\P
+erl64\site\bin\gcc.exe -E -DWIN32 utils/inc.h 2>&1
Creating libPARI/paricfg.h...
'uname' is not recognized as an internal or external command,
operable program or batch file.
...Processor of family `' detected
Checking if your kit is complete...
Looks good
Warning (mostly harmless): No library found for -lm
Warning (mostly harmless): No library found for -lkernel32
Warning (mostly harmless): No library found for -luser32
Warning (mostly harmless): No library found for -lgdi32
Warning (mostly harmless): No library found for -lwinspool
Warning (mostly harmless): No library found for -lcomdlg32
Warning (mostly harmless): No library found for -ladvapi32
Warning (mostly harmless): No library found for -lshell32
Warning (mostly harmless): No library found for -lole32
Warning (mostly harmless): No library found for -loleaut32
Warning (mostly harmless): No library found for -lnetapi32
Warning (mostly harmless): No library found for -luuid
Warning (mostly harmless): No library found for -lws2_32
Warning (mostly harmless): No library found for -lmpr
Warning (mostly harmless): No library found for -lwinmm
Warning (mostly harmless): No library found for -lversion
Warning (mostly harmless): No library found for -lodbc32
Warning (mostly harmless): No library found for -lodbccp32
Warning (mostly harmless): No library found for -lcomctl32
Warning (mostly harmless): No library found for -lmsvcrt
'uname' is not recognized as an internal or external command,
operable program or batch file.
...Processor of family `' detected
####    Do not know how to build for assembler `'.    ####
####    Reversing to assembler-less type `port'.        ####
####                                 ####
####    If you think your processor's assembler is supported    ####
####    by PARI, edit libPARI/Makefile.PL and report.        ####
####                                 ####
####    Alternatively, specify machine=YOURTYPE or machine=none    ###
+#
####    on the                            ####
####      perl Makefile.PL                     ####
####    command line.                         ####
####    Recognized types:                     ####
####      alpha hppa m86k none sparcv7 sparcv8 sparcv8_micro    ####
####      sparcv8_super ix86 (ppc ia64 after 2.2.7)         ####
...I will  use portable assembler-less build
...Assembler is not GNU assembler
Warning (mostly harmless): No library found for -lm
Warning (mostly harmless): No library found for -lkernel32
Warning (mostly harmless): No library found for -luser32
Warning (mostly harmless): No library found for -lgdi32
Warning (mostly harmless): No library found for -lwinspool
Warning (mostly harmless): No library found for -lcomdlg32
Warning (mostly harmless): No library found for -ladvapi32
Warning (mostly harmless): No library found for -lshell32
Warning (mostly harmless): No library found for -lole32
Warning (mostly harmless): No library found for -loleaut32
Warning (mostly harmless): No library found for -lnetapi32
Warning (mostly harmless): No library found for -luuid
Warning (mostly harmless): No library found for -lws2_32
Warning (mostly harmless): No library found for -lmpr
Warning (mostly harmless): No library found for -lwinmm
Warning (mostly harmless): No library found for -lversion
Warning (mostly harmless): No library found for -lodbc32
Warning (mostly harmless): No library found for -lodbccp32
Warning (mostly harmless): No library found for -lcomctl32
Warning (mostly harmless): No library found for -lmsvcrt
Writing Makefile for Math::PARI::libPARI
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Math::Pari
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.64)
Building and testing Math-Pari-2.01080605
cp libPARI.dumb.pod blib\lib\Math\libPARI.dumb.pod
cp PariInit.pm blib\lib\Math\PariInit.pm
cp Pari.pm blib\lib\Math\Pari.pm
cp libPARI.pod blib\lib\Math\libPARI.pod
cd libPARI && C:\Perl64\site\bin\dmake.exe 
C:\Perl64\bin\perl.exe -wle0 > pariinl.h
C:\Perl64\bin\perl.exe -pe1 ../pari-2.1.7/src/kernel/none/level0.h ../
+pari-2.1.7/src/kernel/none/level1.h              >> pariinl.h
C:\Perl64\site\bin\gcc.exe -c  -I ../pari-2.1.7/src -I ../pari-2.1.7/s
+rc/headers -I ../pari-2.1.7/src/graph -I .     -DNDEBUG -DWIN32 -D_CO
+NSOLE -DNO_STRICT -DWIN64 -DCONSERVATIVE -DPERL_TEXTMODE_SCRIPTS -DUS
+E_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PER
+LIO -DHASATTRIBUTE -fno-strict-aliasing -mms-bitfields -DPERLDLL -O2 
+      -DVERSION=\"\"     -DXS_VERSION=\"\"  -Derr=pari_err -DASMINLIN
+E -DGCC_INLINE -DDYNAMIC_PLOTTING -o es.o ../pari-2.1.7/src/language/
+es.c
In file included from ../pari-2.1.7/src/headers/pari.h:94:0,
                 from ../pari-2.1.7/src/language/es.c:21:
./pariinl.h: In function 'new_chunk':
./pariinl.h:368:18: warning: cast to pointer from integer of different
+ size
[download]
In reply to Re^2: installing Math::Pari on Windows by moez507
in thread installing Math::Pari on Windows by moez507
Are you posting in the right place? Check out Where do I post X? to know for sure.
Posts may use any of the Perl Monks Approved HTML tags. Currently these include the following:
<code> <a> <b> <big> <blockquote> <br /> <dd> <dl> <dt> <em> <font> <h1> <h2> <h3> <h4> <h5> <h6> <hr /> <i> <li> <nbsp> <ol> <p> <small> <strike> <strong> <sub> <sup> <table> <td> <th> <tr> <tt> <u> <ul>
Snippets of code should be wrapped in <code> tags not <pre> tags. In fact, <pre> tags should generally be avoided. If they must be used, extreme care should be taken to ensure that their contents do not have long lines (<70 chars), in order to prevent horizontal scrolling (and possible janitor intervention).
Want more info? How to link or How to display code and escape characters are good places to start.

Welcome to the Monastery
	PerlMonks