Is there an option to send commands and collect output when using $ssh->shell interactive mode?
I think this is the only way I'll success since customer node is not a standard Linux box
Anyway, this is the output when I run the code above:
sem1: Reading configuration data /root/.ssh/config
sem1: Reading configuration data /etc/ssh_config
sem1: Allocated local port 1023.
sem1: Connecting to 184.108.40.206, port 22.
sem1: Remote protocol version 2.0, remote software version OpenSSH_4.3
sem1: Net::SSH::Perl Version 1.33, protocol version 2.0.
sem1: No compat match: OpenSSH_4.3-40020723001500.
sem1: Connection established.
sem1: Sent key-exchange init (KEXINIT), wait response.
sem1: Algorithms, c->s: 3des-cbc hmac-sha1 none
sem1: Algorithms, s->c: 3des-cbc hmac-sha1 none
sem1: Entering Diffie-Hellman Group 1 key exchange.
sem1: Sent DH public key, waiting for reply.
sem1: Received host key, type 'ssh-dss'.
sem1: Host '220.127.116.11' is known and matches the host key.
sem1: Computing shared secret key.
sem1: Verifying server signature.
sem1: Waiting for NEWKEYS message.
sem1: Enabling incoming encryption/MAC/compression.
sem1: Send NEWKEYS, enable outgoing encryption/MAC/compression.
sem1: Sending request for user-authentication service.
sem1: Service accepted: ssh-userauth.
sem1: Trying empty user-authentication request.
sem1: Authentication methods that can continue: password.
sem1: Next method to try is password.
sem1: Trying password authentication.
sem1: Login completed, opening dummy shell channel.
sem1: channel 0: new [client-session]
sem1: Requesting channel_open for channel 0.
sem1: channel 0: open confirm rwindow 0 rmax 32768
sem1: Got channel open confirmation, requesting shell.
sem1: Requesting service shell on channel 0.
sem1: channel 1: new [client-session]
sem1: Requesting channel_open for channel 1.
sem1: Entering interactive session.
Received disconnect message: No pty allocated, pty required with Telne
+SH2.pm line 300
Posts are HTML formatted. Put <p> </p> tags around your paragraphs. Put <code> </code> tags around your code and data!
Read Where should I post X? if you're not absolutely sure you're posting in the right place.
Please read these before you post! —
Posts may use any of the Perl Monks Approved HTML tags:
Outside of code tags, you may need to use entities for some characters:
- a, abbr, b, big, blockquote, br, caption, center, col, colgroup, dd, del, div, dl, dt, em, font, h1, h2, h3, h4, h5, h6, hr, i, ins, li, ol, p, pre, readmore, small, span, spoiler, strike, strong, sub, sup, table, tbody, td, tfoot, th, thead, tr, tt, u, ul, wbr
Link using PerlMonks shortcuts! What shortcuts can I use for linking?
See Writeup Formatting Tips and other pages linked from there for more info.
| & || & |
| < || < |
| > || > |
| [ || [ |
| ] || ] ||