cpan[2]> install Smart::Comments
CPAN: Storable loaded ok (v2.18)
Going to read '/ark/cpan/Metadata'
Database was generated on Sat, 20 Feb 2010 10:45:55 GMT
Running install for module 'Smart::Comments'
CPAN: YAML loaded ok (v0.71)
Running make for C/CH/CHORNY/Smart-Comments-1.0.4.tar.gz
CPAN: Digest::SHA loaded ok (v5.48)
CPAN: Compress::Zlib loaded ok (v2.024)
Checksum for /ark/cpan/sources/authors/id/C/CH/CHORNY/Smart-Comments-1.0.4.tar.gz ok
... (much output; looks good) ...
Building Smart-Comments
CHORNY/Smart-Comments-1.0.4.tar.gz
./Build --install_base /lab/perl --install_base /lab/perl -- OK
Running Build test
t/00.load.t ................. 1/1 # Testing Smart::Comments 1.0.4
t/00.load.t ................. ok
...(many more tests, ok)...
All tests successful.
Files=24, Tests=119, 1 wallclock secs ( 0.09 usr 0.03 sys + 1.17 cusr 0.11 csys = 1.40 CPU)
Result: PASS
CHORNY/Smart-Comments-1.0.4.tar.gz
./Build test -- OK
Running Build install
Prepending /ark/cpan/build/Smart-Comments-1.0.4-Sjn7Vr/blib/arch /ark/cpan/build/Smart-Comments-1.0.4-Sjn7Vr/blib/lib to PERL5LIB for 'install'
Building Smart-Comments
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/usr/local/man/man3'
Do not have write permissions on '/usr/local/man/man3'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at /usr/local/share/perl/5.10.0/Module/Build/Base.pm line 3326
CHORNY/Smart-Comments-1.0.4.tar.gz
./Build install -- NOT OK
----
You may have to su to root to install the package
(Or you may want to run something like
o conf make_install_make_command 'sudo make'
to raise your permissions.Failed during this command:
CHORNY/Smart-Comments-1.0.4.tar.gz : install NO
####
$CPAN::Config = {
'applypatch' => q[],
'auto_commit' => q[1],
'build_cache' => q[2048],
'build_dir' => q[/ark/cpan/build],
'build_dir_reuse' => q[0],
'build_requires_install_policy' => q[yes],
'bzip2' => q[/bin/bzip2],
'cache_metadata' => q[1],
'check_sigs' => q[0],
'colorize_debug' => q[black on_white],
'colorize_output' => q[1],
'colorize_print' => q[black],
'colorize_warn' => q[bold red on_white],
'commandnumber_in_prompt' => q[1],
'connect_to_internet_ok' => q[1],
'cpan_home' => q[/ark/cpan],
'curl' => q[/usr/bin/curl],
'ftp' => q[/usr/bin/ftp],
'ftp_passive' => q[1],
'ftp_proxy' => q[],
'getcwd' => q[cwd],
'gpg' => q[/usr/bin/gpg],
'gzip' => q[/bin/gzip],
'halt_on_failure' => q[0],
'histfile' => q[/ark/cpan/histfile],
'histsize' => q[1000],
'http_proxy' => q[],
'inactivity_timeout' => q[0],
'index_expire' => q[1],
'inhibit_startup_message' => q[0],
'keep_source_where' => q[/ark/cpan/sources],
'load_module_verbosity' => q[v],
'lynx' => q[],
'make' => q[/usr/bin/make],
'make_arg' => q[],
'make_install_arg' => q[],
'make_install_make_command' => q[/usr/bin/make],
'makepl_arg' => q[LIB=/lab/perl/lib INSTALLMAN1DIR=/lab/perl/man/man1 INSTALLMAN3DIR=/lab/perl/man/man3 INSTALLSCRIPT=/lab/bin INSTALLBIN=/lab/bin],
'mbuild_arg' => q[--install_base /lab/perl],
'mbuild_install_arg' => q[],
'mbuild_install_build_command' => q[./Build],
'mbuildpl_arg' => q[--lib=/lab/perl/lib --installman1dir=/lab/perl/man/man1 --installman3dir=/lab/perl/man/man3 --installscript=/lab/bin --installbin=/lab/bin],
'ncftp' => q[],
'ncftpget' => q[],
'no_proxy' => q[],
'pager' => q[/usr/bin/less],
'patch' => q[/usr/bin/patch],
'perl5lib_verbosity' => q[v],
'prefer_installer' => q[MB],
'prefs_dir' => q[/ark/cpan/prefs],
'prerequisites_policy' => q[follow],
'scan_cache' => q[atstart],
'shell' => q[/bin/bash],
'show_unparsable_versions' => q[0],
'show_upload_date' => q[0],
'show_zero_versions' => q[0],
'tar' => q[/bin/tar],
'tar_verbosity' => q[v],
'term_is_latin' => q[1],
'term_ornaments' => q[1],
'test_report' => q[0],
'trust_test_report_history' => q[0],
'unzip' => q[/usr/bin/unzip],
'urllist' => [q[ftp://cpan-sj.viaverio.com/pub/CPAN/], q[ftp://cpan.erlbaum.net/CPAN/], q[ftp://cpan.hexten.net/], q[ftp://cpan.llarian.net/pub/CPAN/], q[ftp://cpan.mirrors.tds.net/pub/CPAN], q[ftp://cpan.netnitco.net/pub/mirrors/CPAN/], q[ftp://cpan.pair.com/pub/CPAN/], q[ftp://cpan.uchicago.edu/pub/CPAN/], q[ftp://ftp-mirror.internap.com/pub/CPAN/], q[ftp://ftp.cise.ufl.edu/pub/mirrors/CPAN/], q[ftp://ftp.epix.net/pub/languages/perl/], q[ftp://ftp.ncsu.edu/pub/mirror/CPAN/], q[ftp://ftp.ndlug.nd.edu/pub/perl/], q[ftp://ftp.osuosl.org/pub/CPAN/], q[ftp://ftp.uwsg.iu.edu/pub/perl/CPAN/]],
'use_sqlite' => q[0],
'wget' => q[/usr/bin/wget],
'yaml_load_code' => q[0],
'yaml_module' => q[YAML],
};
1;
__END__
##
##
Summary of my perl5 (revision 5 version 10 subversion 1) configuration:
Platform:
osname=linux, osvers=2.6.31-19-generic, archname=i686-linux
uname='linux oz 2.6.31-19-generic #56-ubuntu smp thu jan 28 01:26:53 utc 2010 i686 gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=undef, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2 -g',
cppflags='-DDEBUGGING -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.4.1', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.10.1.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.10.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -g -L/usr/local/lib -fstack-protector'
Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP
USE_FAST_STDIO USE_LARGE_FILES USE_PERLIO
Built under linux
Compiled at Feb 20 2010 06:21:34
@INC:
/lab/lib/perl5/5.10.1
/lab/lib/perl5/5.10.1
.