cpanm (App::cpanminus) 1.5021 on perl 5.016002 built for MSWin32-x64-m
+ulti-thread
Work directory is /.cpanm/work/1375126747.1448
You have make C:\Perl64\site\bin\dmake.exe
You have LWP 6.04
Falling back to Archive::Tar 1.90
You have C:\app\client\product\11.2.0\client_1\bin\unzip.exe
Searching Math::Pari on cpanmetadb ...
--> Working on Math::Pari
Fetching http://www.cpan.org/authors/id/I/IL/ILYAZ/modules/Math-Pari-2
+.01080605.tar.gz
-> OK
Unpacking Math-Pari-2.01080605.tar.gz
Entering Math-Pari-2.01080605
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.64)
Configuring Math-Pari-2.01080605
Running Makefile.PL
Set up gcc environment - gcc.exe (rubenvb-4.5.4) 4.5.4
Did not find GP/PARI build directory around.
Non-interactive session, autofetching...
Getting GP/PARI from ftp://megrez.math.u-bordeaux.fr/pub/pari/unix/
Not in this directory, now chdir('OLD')...
Available beta versions: `2.0.20 2.0.18 2.0.17 2.0.16 2.0.21 2.0.19'
Latest supported beta is `pari-2.0.21.beta.tgz'
Available golden versions: `2.1.6 2.1.3 2.1.0 2.1.1 2.1.5 2.1.7 1.39.0
+3 2.1.2 2.1.4'
Latest supported golden is `pari-2.1.7.tgz'
Picking golden version 2.1.7, file pari-2.1.7.tgz
Downloading `ftp://megrez.math.u-bordeaux.fr/pub/pari/unix/pari-2.1.7.
+tgz'...
Downloaded...
Extracting...
gzip -dc pari-2.1.7.tgz | tar -xvf -
'gzip' is not recognized as an internal or external command,
operable program or batch file.
Can't un-targz PARI: $!=Bad file descriptor, exitcode=65280.
Now retry with "C:\Perl64\bin\perl.exe" "-MArchive::Tar" "-wle" "Arc
+hive::Tar->new(shift)->extract()" "pari-2.1.7.tgz"
Looking for patches for 2.1.7...
Patching...
'patch' is not recognized as an internal or external command,
operable program or batch file.
cd pari-2.1.7 && patch -p1 < ..\patches\diff_2.1.7_mingw-w64
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1 < ..\patches\patch-pari-unnormalized-float
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1 < ..\patches\diff_2.1.7_-O
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1 < ..\patches\diff_2.1.7_div
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1 < ..\patches\diff_2.1.6_align_power_of_2
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
cd pari-2.1.7 && patch -p1 < ..\patches\diff_2.1.7_restart
'patch' is not recognized as an internal or external command,
operable program or batch file.
...Could not patch: $?=256, ; continuing anyway...
Finished patching...
Setting up Math::Pari with Perl 5.016002 on MSWin32 version 5.2;
cc=C:\Perl64\site\bin\gcc.exe, gccversion=gcc.exe (rubenvb-4.5.4) 4
+.5.4, cccdlflags=' ',
ccflags='-DNDEBUG -DWIN32 -D_CONSOLE -DNO_STRICT -DWIN64 -DCONSERVA
+TIVE -DPERL_TEXTMODE_SCRIPTS -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONT
+EXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DHASATTRIBUTE -fno-strict-alias
+ing -mms-bitfields',
optimize='-O2',
ld=C:\Perl64\site\bin\g++.exe, ldflags='-L"C:\Perl64\lib\CORE"'.
Found GP/PARI build directory in pari-2.1.7
(integer-formatted version 2001007).
### GP/PARI library version 2.1.* has many problems fixed in version
+s 2.3.*.
### Especially important are the problems with symbols `hiremainder'
+ and
### `overflow' - if your build fails and error messages contain thes
+e
### words, updating to 2.3.* might allow your use of fast processor-
+specific
### assembler code.)
### Switching to 2.3.* should be as simple as giving Makefile.PL an
+option
### version23_ok=1
### (if you or Makefile.PL already downloaded-and-extracted versio
+n-2.1.*
### distribution, give an extra option, force_download).
### Alternatively, give option
### paridir=DIRECTORY-of-extracted-distribution
### However, keep in mind: v.2.3.* supports only plotting to PostScr
+ipt.
...Generating libPARI/paricfg.h ...
Scanning header files...
Note (probably harmless): Errors reading from pipe: '', exit=256: C:\P
+erl64\site\bin\gcc.exe -E -DWIN32 utils/inc.h 2>&1
Creating libPARI/paricfg.h...
'uname' is not recognized as an internal or external command,
operable program or batch file.
...Processor of family `' detected
Checking if your kit is complete...
Looks good
Warning (mostly harmless): No library found for -lm
Warning (mostly harmless): No library found for -lkernel32
Warning (mostly harmless): No library found for -luser32
Warning (mostly harmless): No library found for -lgdi32
Warning (mostly harmless): No library found for -lwinspool
Warning (mostly harmless): No library found for -lcomdlg32
Warning (mostly harmless): No library found for -ladvapi32
Warning (mostly harmless): No library found for -lshell32
Warning (mostly harmless): No library found for -lole32
Warning (mostly harmless): No library found for -loleaut32
Warning (mostly harmless): No library found for -lnetapi32
Warning (mostly harmless): No library found for -luuid
Warning (mostly harmless): No library found for -lws2_32
Warning (mostly harmless): No library found for -lmpr
Warning (mostly harmless): No library found for -lwinmm
Warning (mostly harmless): No library found for -lversion
Warning (mostly harmless): No library found for -lodbc32
Warning (mostly harmless): No library found for -lodbccp32
Warning (mostly harmless): No library found for -lcomctl32
Warning (mostly harmless): No library found for -lmsvcrt
'uname' is not recognized as an internal or external command,
operable program or batch file.
...Processor of family `' detected
#### Do not know how to build for assembler `'. ####
#### Reversing to assembler-less type `port'. ####
#### ####
#### If you think your processor's assembler is supported ####
#### by PARI, edit libPARI/Makefile.PL and report. ####
#### ####
#### Alternatively, specify machine=YOURTYPE or machine=none ###
+#
#### on the ####
#### perl Makefile.PL ####
#### command line. ####
#### Recognized types: ####
#### alpha hppa m86k none sparcv7 sparcv8 sparcv8_micro ####
#### sparcv8_super ix86 (ppc ia64 after 2.2.7) ####
...I will use portable assembler-less build
...Assembler is not GNU assembler
Warning (mostly harmless): No library found for -lm
Warning (mostly harmless): No library found for -lkernel32
Warning (mostly harmless): No library found for -luser32
Warning (mostly harmless): No library found for -lgdi32
Warning (mostly harmless): No library found for -lwinspool
Warning (mostly harmless): No library found for -lcomdlg32
Warning (mostly harmless): No library found for -ladvapi32
Warning (mostly harmless): No library found for -lshell32
Warning (mostly harmless): No library found for -lole32
Warning (mostly harmless): No library found for -loleaut32
Warning (mostly harmless): No library found for -lnetapi32
Warning (mostly harmless): No library found for -luuid
Warning (mostly harmless): No library found for -lws2_32
Warning (mostly harmless): No library found for -lmpr
Warning (mostly harmless): No library found for -lwinmm
Warning (mostly harmless): No library found for -lversion
Warning (mostly harmless): No library found for -lodbc32
Warning (mostly harmless): No library found for -lodbccp32
Warning (mostly harmless): No library found for -lcomctl32
Warning (mostly harmless): No library found for -lmsvcrt
Writing Makefile for Math::PARI::libPARI
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Math::Pari
Writing MYMETA.yml and MYMETA.json
-> OK
Checking dependencies from MYMETA.json ...
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.64)
Building and testing Math-Pari-2.01080605
cp libPARI.dumb.pod blib\lib\Math\libPARI.dumb.pod
cp PariInit.pm blib\lib\Math\PariInit.pm
cp Pari.pm blib\lib\Math\Pari.pm
cp libPARI.pod blib\lib\Math\libPARI.pod
cd libPARI && C:\Perl64\site\bin\dmake.exe
C:\Perl64\bin\perl.exe -wle0 > pariinl.h
C:\Perl64\bin\perl.exe -pe1 ../pari-2.1.7/src/kernel/none/level0.h ../
+pari-2.1.7/src/kernel/none/level1.h >> pariinl.h
C:\Perl64\site\bin\gcc.exe -c -I ../pari-2.1.7/src -I ../pari-2.1.7/s
+rc/headers -I ../pari-2.1.7/src/graph -I . -DNDEBUG -DWIN32 -D_CO
+NSOLE -DNO_STRICT -DWIN64 -DCONSERVATIVE -DPERL_TEXTMODE_SCRIPTS -DUS
+E_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PER
+LIO -DHASATTRIBUTE -fno-strict-aliasing -mms-bitfields -DPERLDLL -O2
+ -DVERSION=\"\" -DXS_VERSION=\"\" -Derr=pari_err -DASMINLIN
+E -DGCC_INLINE -DDYNAMIC_PLOTTING -o es.o ../pari-2.1.7/src/language/
+es.c
In file included from ../pari-2.1.7/src/headers/pari.h:94:0,
from ../pari-2.1.7/src/language/es.c:21:
./pariinl.h: In function 'new_chunk':
./pariinl.h:368:18: warning: cast to pointer from integer of different
+ size