#!/usr/bin/perl
use strict; # https://perlmonks.org/?node_id=11121971
use warnings;
my @answer;
{
local $/ = '';
while( <DATA> )
{
/=/ and push @answer, { /^\h*(\S.*?\S)\h*= (.*)/gm };
}
}
use Data::Dump 'dd'; dd \@answer;
__DATA__
Storage system address: 192.168.1.2
Storage system port: 443
HTTPS connection
1: ID = disk_dpe_0_0
Enclosure = DPE_0
Slot = 0
Name = DPE Disk 0
Health state = OK (5)
Health details = "The component is operating normally. No ac
+tion is required."
Type = SAS
Capacity = 288196762624 (268.4G)
Rotational speed = 15000 rpm
User capacity = 236420176896 (220.2G)
Pool = performance
Current speed = 6 Gbps
Maximum speed = 6 Gbps
Manufacturer = SEAGATE
Model = STE30065 CLAR300
Vendor capacity = 322122547200 (300.0G)
Part number = 005049273
Serial number = 6SJ2C6MV
Firmware revision = ES0E
WWN = 06:00:00:00:05:00:00:00:00:00:00:00:00:00:00
+:03
2: ID = disk_dpe_0_1
Enclosure = DPE_0
Slot = 1
Name = DPE Disk 1
Health state = OK (5)
Health details = "The component is operating normally. No ac
+tion is required."
Type = SAS
Capacity = 288196762624 (268.4G)
Rotational speed = 15000 rpm
User capacity = 236420176896 (220.2G)
Pool = performance
Current speed = 6 Gbps
Maximum speed = 6 Gbps
Manufacturer = SEAGATE
Model = STE30065 CLAR300
Vendor capacity = 322122547200 (300.0G)
Part number = 005049273
Serial number = 6SJ28QF3
Firmware revision = ES0E
WWN = 06:00:00:00:05:00:00:00:01:00:00:00:01:00:00
+:03