Unfortunately I can't install it. Failed both using cpanm and cpan. I'm not sure what is the problem. Here is the log:
cpanm (App::cpanminus) 1.0012 on perl 5.010001 built for i486-linux-gn
+u-thread-multi
Work directory is /home/dave/.cpanm/work/1285489233.5207
You have make /usr/bin/make
You have LWP 5.834
You have /bin/tar: tar (GNU tar) 1.22
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gp
+l.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by John Gilmore and Jay Fenlason.
You have /usr/bin/unzip
Searching R::Writer on cpanmetadb ...
Fetching http://search.cpan.org/CPAN/authors/id/D/DM/DMAKI/R-Writer-0.
+00001.tar.gz
-> OK
Unpacking R-Writer-0.00001.tar.gz
Entering R-Writer-0.00001
Configuring R-Writer-0.00001
Running Makefile.PL
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Class::Accessor::Fast ...loaded. (0.34)
- JSON::XS ...loaded. (2.29 >= 2.01)
- Sub::Exporter ...missing.
==> Auto-install the 1 mandatory module(s) from CPAN? [y] y
*** Since we're running under CPANPLUS, I'll just let it take care
of the dependency's installation later.
*** Module::AutoInstall configuration finished.
Warning: prerequisite Sub::Exporter 0 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for R::Writer
-> OK
Finding PREREQ from Makefile ...
Checking if you have Sub::Exporter 0 ... No
Checking if you have JSON::XS 2.01 ... Yes (2.29)
Checking if you have Class::Accessor::Fast 0 ... Yes (0.34)
==> Found dependencies: Sub::Exporter
Searching Sub::Exporter on cpanmetadb ...
Fetching http://search.cpan.org/CPAN/authors/id/R/RJ/RJBS/Sub-Exporter
+-0.982.tar.gz
-> OK
Unpacking Sub-Exporter-0.982.tar.gz
Entering Sub-Exporter-0.982
Configuring Sub-Exporter-0.982
Running Makefile.PL
Warning: prerequisite Data::OptList 0.1 not found.
Warning: prerequisite Params::Util 0.14 not found.
Warning: prerequisite Sub::Install 0.92 not found.
Checking if your kit is complete...
Looks good
Writing Makefile for Sub::Exporter
-> OK
Finding PREREQ from Makefile ...
Checking if you have Params::Util 0.14 ... No
Checking if you have Sub::Install 0.92 ... No
Checking if you have ExtUtils::MakeMaker 6.55 ... Yes (6.55_02)
Checking if you have Data::OptList 0.1 ... No
==> Found dependencies: Params::Util, Sub::Install, Data::OptList
Searching Params::Util on cpanmetadb ...
Fetching http://search.cpan.org/CPAN/authors/id/A/AD/ADAMK/Params-Util
+-1.01.tar.gz
-> OK
Unpacking Params-Util-1.01.tar.gz
Entering Params-Util-1.01
Checking if you have ExtUtils::MakeMaker 6.42 ... Yes (6.55_02)
Configuring Params-Util-1.01
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Params::Util
-> OK
Finding PREREQ from Makefile ...
Checking if you have Test::More 0.42 ... Yes (0.92)
Checking if you have Scalar::Util 1.18 ... Yes (1.21)
Checking if you have File::Spec 0.80 ... Yes (3.30)
Building and testing Params-Util-1.01 for Params::Util
cp lib/Params/Util.pm blib/lib/Params/Util.pm
/usr/bin/perl /usr/local/share/perl/5.10.1/ExtUtils/xsubpp -typemap /
+usr/share/perl/5.10/ExtUtils/typemap Util.xs > Util.xsc && mv Util.x
+sc Util.c
cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe
+ -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_O
+FFSET_BITS=64 -O2 -g -DVERSION=\"1.01\" -DXS_VERSION=\"1.01\" -fPIC
+ "-I/usr/lib/perl/5.10/CORE" -DPERL_EXT Util.c
Running Mkbootstrap for Params::Util ()
chmod 644 Util.bs
rm -f blib/arch/auto/Params/Util/Util.so
cc -shared -O2 -g -L/usr/local/lib -fstack-protector Util.o -o blib/
+arch/auto/Params/Util/Util.so \
\
chmod 755 blib/arch/auto/Params/Util/Util.so
cp Util.bs blib/arch/auto/Params/Util/Util.bs
chmod 644 blib/arch/auto/Params/Util/Util.bs
Manifying blib/man3/Params::Util.3pm
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_h
+arness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_compile.t .... ok
t/02_main.t ....... ok
t/03_all.t ........ ok
t/04_codelike.t ... ok
t/05_typelike.t ... ok
t/06_invocant.t ... ok
t/07_handle.t ..... ok
t/08_driver.t ..... ok
t/09_insideout.t .. ok
t/11_compile.t .... ok
t/12_main.t ....... ok
t/13_all.t ........ ok
t/14_codelike.t ... ok
t/15_typelike.t ... ok
t/16_invocant.t ... ok
t/17_handle.t ..... ok
t/18_driver.t ..... ok
t/19_insideout.t .. ok
All tests successful.
Files=18, Tests=1654, 0 wallclock secs ( 0.19 usr 0.01 sys + 0.63 c
+usr 0.05 csys = 0.88 CPU)
Result: PASS
Files found in blib/arch: installing files in blib/lib into architectu
+re dependent library tree
Installing /usr/local/lib/perl/5.10.1/auto/Params/Util/Util.so
Installing /usr/local/lib/perl/5.10.1/auto/Params/Util/Util.bs
Installing /usr/local/lib/perl/5.10.1/Params/Util.pm
Installing /usr/local/man/man3/Params::Util.3pm
Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.po
+d
-> OK
Successfully installed Params-Util-1.01
Searching Sub::Install on cpanmetadb ...
Fetching http://search.cpan.org/CPAN/authors/id/R/RJ/RJBS/Sub-Install-
+0.925.tar.gz
-> OK
Unpacking Sub-Install-0.925.tar.gz
Entering Sub-Install-0.925
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.55_02)
Configuring Sub-Install-0.925
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Sub::Install
-> OK
Finding PREREQ from Makefile ...
Checking if you have Test::More 0 ... Yes (0.92)
Checking if you have Scalar::Util 0 ... Yes (1.21)
Building and testing Sub-Install-0.925 for Sub::Install
cp lib/Sub/Install.pm blib/lib/Sub/Install.pm
Manifying blib/man3/Sub::Install.3pm
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_h
+arness(0, 'blib/lib', 'blib/arch')" t/*.t
# Testing Sub::Install 0.925
t/00-load.t ....... ok
t/auto_as.t ....... ok
t/export.t ........ ok
t/inst-blessed.t .. ok
t/install.t ....... ok
t/misc_errors.t ... ok
t/perl-critic.t ... skipped: define PERL_TEST_CRITIC to run these test
+s
t/pod-coverage.t .. skipped: Test::Pod::Coverage 1.06 required for tes
+ting POD coverage
t/pod.t ........... skipped: Test::Pod 1.14 required for testing POD
t/reinstall.t ..... ok
t/SI_install.t .... ok
t/SI_reinstall.t .. ok
All tests successful.
Files=12, Tests=65, 1 wallclock secs ( 0.04 usr 0.00 sys + 0.22 cus
+r 0.00 csys = 0.26 CPU)
Result: PASS
Manifying blib/man3/Sub::Install.3pm
Installing /usr/local/share/perl/5.10.1/Sub/Install.pm
Installing /usr/local/man/man3/Sub::Install.3pm
Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.po
+d
-> OK
Successfully installed Sub-Install-0.925
Searching Data::OptList on cpanmetadb ...
Fetching http://search.cpan.org/CPAN/authors/id/R/RJ/RJBS/Data-OptList
+-0.106.tar.gz
-> OK
Unpacking Data-OptList-0.106.tar.gz
Entering Data-OptList-0.106
Checking if you have ExtUtils::MakeMaker 6.42 ... Yes (6.55_02)
Configuring Data-OptList-0.106
Running Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for Data::OptList
-> OK
Finding PREREQ from Makefile ...
Checking if you have List::Util 0 ... Yes (1.21)
Checking if you have Params::Util 0.14 ... Yes (1.01)
Checking if you have Sub::Install 0.921 ... Yes (0.925)
Checking if you have ExtUtils::MakeMaker 6.42 ... Yes (6.55_02)
Building and testing Data-OptList-0.106 for Data::OptList
cp lib/Data/OptList.pm blib/lib/Data/OptList.pm
Manifying blib/man3/Data::OptList.3pm
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_h
+arness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/hash.t ... ok
t/mkopt.t .. ok
All tests successful.
Files=2, Tests=32, 0 wallclock secs ( 0.01 usr 0.01 sys + 0.06 cusr
+ 0.00 csys = 0.08 CPU)
Result: PASS
Manifying blib/man3/Data::OptList.3pm
Installing /usr/local/share/perl/5.10.1/Data/OptList.pm
Installing /usr/local/man/man3/Data::OptList.3pm
Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.po
+d
-> OK
Successfully installed Data-OptList-0.106
Building and testing Sub-Exporter-0.982 for Sub::Exporter
cp lib/Sub/Exporter/Util.pm blib/lib/Sub/Exporter/Util.pm
cp lib/Sub/Exporter/Cookbook.pod blib/lib/Sub/Exporter/Cookbook.pod
cp lib/Sub/Exporter/Tutorial.pod blib/lib/Sub/Exporter/Tutorial.pod
cp lib/Sub/Exporter.pm blib/lib/Sub/Exporter.pm
Manifying blib/man3/Sub::Exporter::Util.3pm
Manifying blib/man3/Sub::Exporter::Cookbook.3pm
Manifying blib/man3/Sub::Exporter::Tutorial.3pm
Manifying blib/man3/Sub::Exporter.3pm
/usr/bin/perl "-Iinc" "-MModule::Install::ExtraTests" "-e" "Module::In
+stall::ExtraTests::__harness('Test::Harness', 0, '', 'xt/release', ''
+, 0, 'blib/lib', 'blib/arch')" t/*.t
t/col-init.t .............. ok
t/collection.t ............ ok
t/expand-group.t .......... ok
t/faux-export.t ........... ok
t/gen-callable.t .......... ok
t/group-generator.t ....... ok
t/inherited.t ............. ok
t/into-level.t ............ ok
t/real-export-groupgen.t .. ok
t/real-export-href.t ...... ok
t/real-export-setup.t ..... ok
t/util-curry.t ............ ok
t/util-currychain.t ....... ok
t/util-like.t ............. ok
t/util-merge.t ............ ok
t/util-mixin.t ............ skipped: the mixin exporter requires Packa
+ge::Generator
t/util-namemap.t .......... skipped: not actually offerring this featu
+re yet
t/valid-config.t .......... ok
All tests successful.
Files=18, Tests=249, 0 wallclock secs ( 0.06 usr 0.01 sys + 0.49 cu
+sr 0.06 csys = 0.62 CPU)
Result: PASS
Installing /usr/local/share/perl/5.10.1/Sub/Exporter.pm
Installing /usr/local/share/perl/5.10.1/Sub/Exporter/Tutorial.pod
Installing /usr/local/share/perl/5.10.1/Sub/Exporter/Util.pm
Installing /usr/local/share/perl/5.10.1/Sub/Exporter/Cookbook.pod
Installing /usr/local/man/man3/Sub::Exporter.3pm
Installing /usr/local/man/man3/Sub::Exporter::Cookbook.3pm
Installing /usr/local/man/man3/Sub::Exporter::Util.3pm
Installing /usr/local/man/man3/Sub::Exporter::Tutorial.3pm
Appending installation info to /usr/local/lib/perl/5.10.1/perllocal.po
+d
-> OK
Successfully installed Sub-Exporter-0.982
Building and testing R-Writer-0.00001 for R::Writer
/usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=Sub::Exporte
+r,0
cp lib/R/Writer/Var.pm blib/lib/R/Writer/Var.pm
cp lib/R/Writer/Call.pm blib/lib/R/Writer/Call.pm
cp lib/R/Writer.pm blib/lib/R/Writer.pm
cp lib/R/Writer/Range.pm blib/lib/R/Writer/Range.pm
cp lib/R/Writer/Encoder.pm blib/lib/R/Writer/Encoder.pm
Manifying blib/man3/R::Writer::Call.3pm
Manifying blib/man3/R::Writer::Var.3pm
Manifying blib/man3/R::Writer::Range.3pm
Manifying blib/man3/R::Writer.3pm
Manifying blib/man3/R::Writer::Encoder.3pm
/usr/bin/perl "-Iinc" Makefile.PL --config= --installdeps=Sub::Exporte
+r,0
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_h
+arness(0, 'inc', 'blib/lib', 'blib/arch')" t/01_load.t t/02_simple.t
+t/03_assign.t t/04_function.t t/05_reset.t t/06_save.t t/99_pod-cover
+age.t t/99_pod.t
t/01_load.t .......... ok
t/02_simple.t ........ ok
t/03_assign.t ........ ok
t/04_function.t ...... ok
t/05_reset.t ......... ok
# Looks like you planned 14 tests but ran 12.
t/06_save.t ..........
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/14 subtests
(less 2 skipped subtests: 10 okay)
t/99_pod-coverage.t .. skipped: Enable TEST_POD environment variable t
+o test POD
t/99_pod.t ........... skipped: Enable TEST_POD environment variable t
+o test POD
Test Summary Report
-------------------
t/06_save.t (Wstat: 65280 Tests: 12 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 14 tests but ran 12.
Files=8, Tests=26, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.19 cusr
+ 0.02 csys = 0.25 CPU)
Result: FAIL
Failed 1/8 test programs. 0/26 subtests failed.
make: *** [test_dynamic] Error 255
-> FAIL Installing R::Writer failed. See /home/dave/.cpanm/build.log f
+or details.
|