Beefy Boxes and Bandwidth Generously Provided by pair Networks
Just another Perl shrine
 
PerlMonks  

Re^4: PPM missing in ActiveState 5.28 trying to install IMage::Magick

by syphilis (Bishop)
on Feb 22, 2020 at 12:11 UTC ( #11113332=note: print w/replies, xml ) Need Help??


in reply to Re^3: PPM missing in ActiveState 5.28 trying to install IMage::Magick
in thread PPM missing in ActiveState 5.28 trying to install IMage::Magick

Looks like I am going to attempt switch to Strawberry Perl

I think that's a step in a better direction.
However, it's not a panacea, and you might still face some challenges in getting Image::Magick installed.
Strawberry Perl does not provide the prerequisite C libraries for Image::Magick, so you'll still need to source those and then make them accessible to the Image::Magick build process if you want to build Image::Magick yourself.

Of course, as mentioned elsewhere in this thread, Strawberry Perl does ship with a PPM utility, so you could still "ppm install" Image::Magick from the sisyphusion.tk repo if need be (and thereby avoid the need to track down that "prerequisite C library").

Cheers,
Rob
  • Comment on Re^4: PPM missing in ActiveState 5.28 trying to install IMage::Magick

Replies are listed 'Best First'.
Re^5: PPM missing in ActiveState 5.28 trying to install IMage::Magick
by Anonymous Monk on Feb 23, 2020 at 05:59 UTC
    Waah waah waah :D
    $ ppm install Gtk3 Gtk3 Installing package 'Gtk3'... Error installing package 'Gtk3': Error reading http://www.sisyphusion. +tk/ppm/x86/Gtk3-516.tar.gz Installing package 'Gtk3'... Error installing package 'Gtk3': Could not locate a PPD file for packa +ge Gtk3

    This went ok but it made no improvements to install Gtk3 timing out slowly at different points

    ppm install Crypt-SSLeay Net-SSLeay Mozilla::CA IO::Socket::SSL
      $ ppm install Gtk3 Gtk3

      Does it make any difference if you instead run ppm install Gtk3
      Are you running this in a bash shell ? I've never used ppm in anything other than the cmd.exe shell, but I'm not sure, off the top of my head, whether that should matter.
      Also, what does perl -V output ?

      I downloaded http://www.sisyphusion.tk/ppm/x86/Gtk3-516.tar.gz and it unpacked fine for me.
      Also grabbed http://www.sisyphusion.tk/ppm/Gtk3.ppd which seems ok, too.

      Cheers,
      Rob
        ppm install Gtk3 makes no difference, only the error message is usually about Gtk3-516.tar.gz, after really really long delay

        I'm using cmd.exe

        oh, PPM.log sometimes complains

        ppm.bat: read_href: Error reading http://www.sisyphusion.tk/ppm/Glib-O +bject-Introspection.ppd: 500 Can't connect to www.sisyphusion.tk:80 ( +A connection attempt failed because the connected party did not prope +rly respond after a period of time, or established connection failed +because connected host has failed to respond.) at Sun Feb 23 17:54:30 + 2020

        Summary of my perl5 (revision 5 version 16 subversion 1) configuration +: Platform: osname=MSWin32, osvers=6.0, archname=MSWin32-x86-multi-thread uname='' config_args='undef' hint=recommended, useposix=true, d_sigaction=undef useithreads=define, usemultiplicity=define useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=und +ef use64bitint=undef, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags =' -s -O2 -DWIN32 -DPERL_RELOCATABLE_INCPUSH -D +PERL_TEXTMODE_SCRIPTS -DUSE_SITECUSTOMIZE -DPERL_IMPLICIT_CONTEXT -DP +ERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields -D_USE_32BIT_TIM +E_T', optimize='-s -O2', cppflags='-DWIN32' ccversion='', gccversion='4.6.3', gccosandvers='' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234 d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long lo +ng', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='g++', ldflags ='-D_USE_32BIT_TIME_T -s -L"D:\perl\lib\CORE" -L +"D:\perl\mingw\mingw32\i686-w64-mingw32\lib"' libpth=D:\perl\mingw\mingw32\i686-w64-mingw32\lib libs=-lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 +-ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -l +mpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32 perllibs=-lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdl +g32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_3 +2 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32 libc=, so=dll, useshrplib=true, libperl=libperl516.a gnulibc_version='' Dynamic Linking: dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' ' cccdlflags=' ', lddlflags='-mdll -D_USE_32BIT_TIME_T -s -L"D:\perl +\lib\CORE" -L"D:\perl\mingw\mingw32\i686-w64-mingw32\lib"' Characteristics of this binary (from libperl): Compile-time options: HAS_TIMES HAVE_INTERP_INTERN MULTIPLICITY PERLIO_LAYERS PERL_DONT_CREATE_GVSV PERL_IMPLICIT_CONTEXT PERL_IMPLICIT_SYS PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_RELOCATABLE_INCPUSH PL_OP_SLAB_ALLOC USE_ITHREADS USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF USE_SITECUSTOMIZE Built under MSWin32 Compiled at Oct 14 2012 15:01:37 %ENV: PERL_MB_OPT=" --config installhtmldir= --binhtml= " @INC: D:/perl/site/lib/MSWin32-x86-multi-thread D:/perl/site/lib D:/perl/vendor/lib D:/perl/lib .

        $ ppm version 11.11_04

Log In?
Username:
Password:

What's my password?
Create A New User
Node Status?
node history
Node Type: note [id://11113332]
help
Chatterbox?
and the web crawler heard nothing...

How do I use this? | Other CB clients
Other Users?
Others scrutinizing the Monastery: (4)
As of 2020-05-30 12:36 GMT
Sections?
Information?
Find Nodes?
Leftovers?
    Voting Booth?
    If programming languages were movie genres, Perl would be:















    Results (171 votes). Check out past polls.

    Notices?