UPDATE: I've mostly left this Meditation as it was 15 years ago, but since then it's also appeared in Mastering Perl and I'm updating it at


brian's Guide to Solving Any Perl Problem


Follow this guide and save your sanity


My Philosophy of Debugging

I believe in three things:

It is not personal
Forget about code ownership. You may think yourself an artist, but even the old Masters produced a lot of crap. Everybody's code is crap, which means my code is crap and your code is crap. Learn to love that. When you have a problem, your first thought should be ``Something is wrong with my crappy code''. That means you do not get to blame perl. It is not personal.

Forget about how you do things. If the way you did things worked, you would not be reading this. That is not a bad thing. It is just time to evolve. We have all been there.

Personal responsibility
If you have a problem with your script it is just that---your problem. You should do as much to solve it by yourself as you can. Remember, everyone else has their own scripts, which means they have their own problems. Do your homework and give it your best shot before you bother someone else with your problems. If you honestly try everything in this guide and still cannot solve the problem, you have given it your best shot and it is time to bother someone else.

Change how you do things
Fix things so you do not have the same problem again. The problem is probably how you code, not what you code. Change the way you do things to make your life easier. Do not make Perl adapt to you because it will not. Adapt to Perl. It is just a language, not a way of life.

My Method

Does your script compile with strictures?
If you are not already using strictures, turn it on. Perl gurus are gurus because they use strict which leaves them more time to solve other problems, learn new things, and upload working modules to CPAN.

You can turn on strictures within the code with the strict pragma.

        use strict;

You can turn on strictures from the command line with perl's -M switch.

        perl -Mstrict

You may be annoyed at strictures, but after a couple of weeks of programming with them turned on, you will write better code, spend less time chasing simple errors, and probably will not need this guide.

What is the warning?
Perl will warn you about a lot of questionable constructs. Turn on warnings and help Perl help you.

You can use perl's -w switch in the shebang line.

        #!/usr/bin/perl -w

You can turn on warnings from the command line.

        perl -w

You can use lexical warnings with all sorts of interesting features. See warnings for the details.

        use warnings;

If you do not understand a warning, you can look up a verbose version of the warning in perldiag or you can use the diagnostics pragma in your code.

        use diagnostics;

Solve the first problem first!
After you get error or warning messages from perl, fix the first message then see if the perl still issues the other messages. Those extra messages may be artifacts of the first problem.

Look at the code before the line number in the error message!
Perl gives you warning messages when it gets worried and not before. By the time perl gets worried the problem has already occurred and the line number perl is on is actually after the problem. Look at the couple of expressions before the line number in the warning.

Is the value what you think it is?
Do not guess! Actually examine the value right before you want to use it in an expression. The best debugger in the universe is print.
        print STDERR "The value is ]$value]\n";

I enclose $value in braces so I can see any leading or trailing whitespace or newlines.

If I have anything other than a scalar, I use Data::Dumper to print the data structures.

        require Data::Dumper;
        print STDERR "The hash is ", Data::Dumper::Dumper( \%hash ), "\n";
If the value is not what you think it is, back up a few steps and try again! Do this until you find the point at which the value stops being what you think it should be!

You can also use the built-in perl debugger with perl's -d switch. See perldebug for details.

        perl -d

You can also use other debuggers or development environments, like a ptkdb (a graphical debugger based on Tk), Komodo (ActiveState's Perl IDE based on Mozilla), of Affrus on MacOS X.

Are you using the function correctly?
I have been programming Perl for quite a long time and I still look at perlfunc almost every day. Some things I just cannot keep straight, and sometimes I am so sleep-deprived that I take leave of all of my senses and wonder why sprintf() does not print to the screen.

You can look up a particular function with the perldoc command and its -f switch.

        perldoc -f function_name

If you are using a module, check the documentation to make sure you are using it in the right way. You can check the documentation for the module using perldoc.

        perldoc Module::Name
Are you using the right special variable?

Again, I constantly refer to perlvar. Well, not really since I find The Perl Pocket Reference much easier to use.

Do you have the right version of the module?
Some modules change behavior between versions. Do you have the version of the module that you think you have? You can check the module version with a simple perl one-liner.
        perl -MModule::Name -le 'print Module::Name->VERSION';

If you read most of your documentation off of the local machine, like at or, then you are more likely to encounter version differences in documentation.

Have you made a small test case?
If you are trying something new, or think a particular piece of code is acting funny, write the shortest possible program to do just that piece. This removes most of the other factors from consideration. If the small test program does what it thinks it does, the problem probably is not in that code. If the program does not do what you think it does, then perhaps you have found your problem.

Did you check the environment?
Some things depend on environment variables. Are you sure that they are set to the right thing? Is your environment the same that the program will see when it runs? Remember that programs intended for CGI programs or cron jobs may see different environments than those in your interactive shell, especially on different machines.

Perl stores the environment in %ENV. If you need one of those variables, be ready to supply a default value if it does not exist, even if only for testing.

If you still have trouble, inspect the environment.

        require Data::Dumper;
        print STDERR Data::Dumper::Dumper( \%ENV );

Have you checked Google?
If you have a problem, somebody else has probably had that problem. See if one of those other people posted something to the usenet group comp.lang.perl.misc by searching Google Groups ( The difference between people who ask questions on usenet and those who answer them is the ability to use Google Groups effectively.

Have you profiled the application?
If you want to track down the slow parts of the program, have you profiled it? Let Devel::SmallProf do the heavy lifting for you. It counts the times perl executes a line of code as well as how long it takes and prints a nice report.

Which test fails?
If you have a test suite, which test fails? You should be able to track down the error very quickly since each test will only exercise a little bit of code.

If you don't have a test suite, why not make one? If you have a really small script, or this is a one-off script, then I will not make you write a couple of tests. Anything other than that could really benefit from some test scripts. Test::Harness makes this so simple that you really have no excuse not to do it. If you do not have the time, perhaps you are wasting too much time debugging scripts without tests. MakeMaker is just not for modules after all.

Did you talk to the bear?
Explain your problem aloud. Actually say the words.

For a couple of years I had the pleasure of working with a really good programmer who could solve almost anything. When I got really stuck I would walk over to his desk and start to explain my problem. Usually I didn't make it past the third sentence without saying ``Never mind---I got it''. He almost never missed either.

Since you will probably need to do this so much, I recommend some sort of plush toy to act as your Perl therapist so you do not annoy your colleagues. I have a small bear that sits on my desk and I explain problems to him..

Does the problem look different on paper?

You have been staring at the computer screen, so maybe a different medium will let you look at things in a new way. Try looking at a print-out of your program.

If you don't want to use dead trees, try looking at the source without syntax highlight, or even in a different editor. Change up the way it looks and the fonts you use so you see different patterns.

Have you watched The Daily Show with Jon Stewart?
Seriously. Perhaps you do not like Jon Stewart, so choose something else. Take a break. Stop thinking about the problem for a bit and let your mind relax. Come back to the problem later and the fix may become immediately apparent.

Have you packed your ego?
If you still have not made it this far, the problem may be psychological. You might be emotionally attached to a certain part of the code, so you do not change it. You might also think that everyone else is wrong but you. When you do that, you do not seriously consider the most likely source of bugs---yourself. Do not ignore anything. Verify everything.
brian d foy <>